 |
First, measurement the height of the hot water baseboard. The maximum height for a standard Baseboard Protector is 8 inches. If the height of your hot water baseboard exceeds 8 inches, please contact us to help you with a custom size. |
 |
Next, measure the width of your hot water baseboard. The maximum width for a standard Baseboard Protector is 4 inches. If your hot water baseboard is wider than 4 inches, please contact us so we can help you with a custom size.
|
 |
There are only 3 possible ways that your hot water baseboard is mounted:
A) - The hot water baseboard is mounted in one corner of a wall and continues straight across to the opposite corner. To measure for this 'wall to wall' mounting, simply measure the entire length of baseboard from end to end.
|
 |
B) - If your hot water baseboard is only mounted in the middle of a wall, measure the length of the hot water baseboard from end to end.
|
 | C) - When your hot water baseboard begins on a wall and continues around a corner to a perpendicular wall, use this method to get the correct lengths.
You will need to take two separate measurements:
First on the left side starting from the corner, (where the 2 perpendicular walls join together), measure outward to the end of the hot water baseboard.
|
 |
Then measure the perpendicular wall in the same manner. The measurement must be taken from the center of the corner where the two left and right side baseboards join.
*IMPORTANT - these two measurements must not be added together since when a hot water baseboard connects with 2 perpendicular walls, the walls will be counted as 2 separate sections of baseboard.
|
